New strategies for sterilization and preservation of fresh fish skin grafts.

The introduction of fish skin as a biological dressing for treating burns and wounds holds great promise, offering an alternative to existing management strategies. However, the risk of disease transmission is a significant concern. Therefore, this study aimed to examine how established sterilization and preservation procedures affected fish skin grafts' microbiological and histological properties for long-term usage. Lyophilization of the fish skin graft followed by rehydration in normal saline for 15 min did not change the collagen content. Furthermore, gamma irradiation of the lyophilized fish skin graft at different lengths 5, 10, and 25 KGy showed a significant reduction in microbial growth (aerobic bacteria, aerobic yeasts, and fungi) at 15- and 30 days after the irradiation. However, exposure to 10 KGy was found to be the most effective intensity among the different gamma irradiation lengths since it preserved the collagen fiber content and intensity in the lyophilized fish skin grafts at 15- and 30 days after the irradiation. These findings provide efficient preservation and sterilization methods for long-term usage of the fresh Tilapia skin grafts used for biological dressings.

3D Printed Graphene-Based Metamaterials: Guesting Multi-Functionality in One Gain.

Advanced functional materials with fascinating properties and extended structural design have greatly broadened their applications. Metamaterials, exhibiting unprecedented physical properties (mechanical, electromagnetic, acoustic, etc.), are considered frontiers of physics, material science, and engineering. With the emerging 3D printing technology, the manufacturing of metamaterials becomes much more convenient. Graphene, due to its superior properties such as large surface area, superior electrical/thermal conductivity, and outstanding mechanical properties, shows promising applications to add multi-functionality into existing metamaterials for various applications. In this review, the aim is to outline the latest developments and applications of 3D printed graphene-based metamaterials. The structure design of different types of metamaterials and the fabrication strategies for 3D printed graphene-based materials are first reviewed. Then the representative explorations of 3D printed graphene-based metamaterials and multi-functionality that can be introduced with such a combination are further discussed. Subsequently, challenges and opportunities are provided, seeking to point out future directions of 3D printed graphene-based metamaterials.

The optimal concentration of silver nanoparticles in sterilizing fish skin grafts.

Collagen integrity should be considered on using a sterilizing agent for fish skin grafts. This study defined the optimal concentration of silver nanoparticles (Ag NPs) for sterilization of fish skin grafts without disrupting collagen content based on microbiological and histological evaluation. Strips of tilapia skin (n = 5) were randomly allocated to be immersed in Ag NPs solution at different concentrations of 25, 50, 100, and 250 µg/mL, respectively, for 5 min. The treated skin strips underwent bacteriological and histological evaluation. Yeast and fungi were more sensitive to Ag NPs than bacteria. On increasing the nanoparticles concentration, the total counts of aerobic bacteria decrease giving 933.3 ± 28.67, 601 ± 27.66, 288 ± 16.8, 15 ± 4.08 (CFU/cm2 ± S.D) at 25, 50, 100, and 250 µg/mL, respectively, comparing with untreated sample (1453.3 ± 57.92). Yeasts and filamentous fungi also exhibited a similar response, achieving a complete inhibition at 100 and 250 µg/mL. Bacillus cereus and Escherichia coli were the dominant aerobic bacteria, Candida albicans and Rhodotorula glutinis were the dominant aerobic yeasts, whereas Aspergillus niger, Aspergillus fumigatus, and Rhizopus stolonifer were the dominant aerobic fungi. The collagen fibers were loose with a wavey pattern at 25 µg/mL, wavey and slightly disorganized at 50 µg/mL, highly disorganized at 100 µg/mL, and compactly arranged and slightly loose at 250 µg/mL. Ag NPs at a concentration of 250 µg/mL could be considered a reliable and feasible method for the sterilization of fish skin grafts before application on human skin with an effective antimicrobial effect and less disrupting impact on collagen content.

Strong Charge Transfer at 2H-1T Phase Boundary of MoS2 for Superb High-Performance Energy Storage.

Transition metal dichalcogenides exhibit several different phases (e.g., semiconducting 2H, metallic 1T, 1T') arising from the collective and sluggish atomic displacements rooted in the charge-lattice interaction. The coexistence of multiphase in a single sheet enables ubiquitous heterophase and inhomogeneous charge distribution. Herein, by combining the first-principles calculations and experimental investigations, a strong charge transfer ability at the heterophase boundary of molybdenum disulfide (MoS2 ) assembled together with graphene is reported. By modulating the phase composition in MoS2 , the performance of the nanohybrid for energy storage can be modulated, whereby remarkable gravimetric and volumetric capacitances of 272 F g-1 and 685 F cm-3 are demonstrated. As a proof of concept for energy application, a flexible solid-state asymmetric supercapacitor is constructed with the MoS2 -graphene heterolayers, which shows superb energy and power densities (46.3 mWh cm-3 and 3.013 W cm-3 , respectively). The present work demonstrates a new pathway for efficient charge flow and application in energy storage by engineering the phase boundary and interface in 2D materials of transition metal dichalcogenides.

Photosynthetic apparatus of Rhodobacter sphaeroides exhibits prolonged charge storage.

Photosynthetic proteins have been extensively researched for solar energy harvesting. Though the light-harvesting and charge-separation functions of these proteins have been studied in depth, their potential as charge storage systems has not been investigated to the best of our knowledge. Here, we report prolonged storage of electrical charge in multilayers of photoproteins isolated from Rhodobacter sphaeroides. Direct evidence for charge build-up within protein multilayers upon photoexcitation and external injection is obtained by Kelvin-probe and scanning-capacitance microscopies. Use of these proteins is key to realizing a 'self-charging biophotonic device' that not only harvests light and photo-generates charges but also stores them. In strong correlation with the microscopic evidence, the phenomenon of prolonged charge storage is also observed in primitive power cells constructed from the purple bacterial photoproteins. The proof-of-concept power cells generated a photovoltage as high as 0.45 V, and stored charge effectively for tens of minutes with a capacitance ranging from 0.1 to 0.2 F m-2.

(Ni,Co)Se2 /NiCo-LDH Core/Shell Structural Electrode with the Cactus-Like (Ni,Co)Se2 Core for Asymmetric Supercapacitors.

Supercapacitors (SCs) have been widely studied as a class of promising energy-storage systems for powering next-generation E-vehicles and wearable electronics. Fabricating hybrid-types of electrode materials and designing smart nanoarchitectures are effective approaches to developing high-performance SCs. Herein, first, a Ni-Co selenide material (Ni,Co)Se2 with special cactus-like structure as the core, to scaffold the NiCo-layered double hydroxides (LDHs) shell, is designed and fabricated. The cactus-like structural (Ni,Co)Se2 core, as a highly conductive and robust support, promotes the electron transport as well as hinders the agglomeration of LDHs. The synergistic contributions from the two types of active materials together with the superior properties of the cactus-like nanostructure enable the (Ni,Co)Se2 /NiCo-LDH hybrid electrode to exhibit a high capacity of ≈170 mA h g-1 (≈1224 F g-1 ), good rate performance, and long durability. The as-assembled (Ni,Co)Se2 /NiCo-LDH//PC (porous carbon) asymmetric supercapacitor (ASC) with an operating voltage of 1.65 V delivers a high energy density of 39 W h kg-1 at a power density of 1650 W kg-1 . Therefore, the cactus-like core/shell structure offers an effective pathway to engineer advanced electrodes. The assembled flexible ASC is demonstrated to effectively power electronic devices.

2D Metal-Organic Frameworks Derived Nanocarbon Arrays for Substrate Enhancement in Flexible Supercapacitors.

Direct assembling of active materials on carbon cloth (CC) is a promising way to achieve flexible electrodes for energy storage. However, the overall surface area and electrical conductivity of such electrodes are usually limited. Herein, 2D metal-organic framework derived nanocarbon nanowall (MOFC) arrays are successfully developed on carbon cloth by a facile solution + carbonization process. Upon growth of the MOFC arrays, the sites for growth of the active materials are greatly increased, and the equivalent series resistance is decreased, which contribute to the enhancement of the bare CC substrate. After decorating ultrathin flakes of MnO2 and Bi2 O3 on the flexible CC/MOFC substrate, the hierarchical electrode materials show an abrupt improvement of areal capacitances by around 50% and 100%, respectively, compared to those of the active materials on pristine carbon cloth. A flexible supercapacitor can be further assembled using two hierarchical electrodes, which demonstrates an energy density of 124.8 µWh cm-2 at the power density of 2.55 mW cm-2 .

Metal Phosphides and Phosphates-based Electrodes for Electrochemical Supercapacitors.

Phosphorus compounds, such as metal phosphides and phosphates have shown excellent performances and great potential in electrochemical energy storage, which are demonstrated by research works published in recent years. Some of these metal phosphides and phosphates and their hybrids compare favorably with transition metal oxides/hydroxides, which have been studied extensively as a class of electrode materials for supercapacitor applications, where they have limitations in terms of electrical and ion conductivity and device stability. To be specific, metal phosphides have both metalloid characteristics and good electric conductivity. For metal phosphates, the open-framework structures with large channels and cavities endow them with good ion conductivity and charge storage capacity. In this review, we present the recent progress on metal phosphides and phosphates, by focusing on their advantages/disadvantages and potential applications as a new class of electrode materials in supercapacitors. The synthesis methods to prepare these metal phosphides/phosphates are looked into, together with the scientific insights involved, as they strongly affect the electrochemical energy storage performance. Particular attentions are paid to those hybrid-type materials, where strong synergistic effects exist. In the summary, the future perspectives and challenges for the metal phosphides, phosphates and hybrid-types are proposed and discussed.

Metal-organic framework derived hollow CoS2 nanotube arrays: an efficient bifunctional electrocatalyst for overall water splitting.

Self-supported hollow nanoarrays with hierarchical pores and rich reaction sites are promising for advanced electrocatalysis. Herein, we report a rational design of novel CoS2 nanotube arrays assembled on a flexible support which can be directly utilized as an efficient bifunctional electrocatalyst for overall water splitting. Uniform wire-like metal-organic framework (MOF) nanoarrays were first fabricated and a sulfidation process by thermal treatment was carried out to transform the MOF arrays into CoS2 nanotube arrays. The unique hollow CoS2 tubular arrays are shown to provide high surface area for an efficient electrochemical reaction, and the well-defined electrical/mechanical connection to the substrate enhances both mass and electron transfer. The CoS2 nanotube arrays exhibited a high electrochemical activity in catalyzing both oxygen and hydrogen evolution reactions, in terms of low onset potential, high current density and excellent stability. Using the CoS2 nanotube arrays as catalysts, a water-splitting current density of 10 mA cm-2 in alkaline solution is achieved with a cell voltage of 1.67 V, and the stable current can be maintained for 20 h even when the electrode is in a bent state.